An operator wearing protective clothing controls a Mirus wet blast gun. The accelerated slurry from this will strip: paint, rust, grease and other debris from the surface of the component.

Using a Vapormatt glandless "Vortex" pump Vapormatt sump units can be used for the processing of larger items that are either to big to fit in a cabinet or have hard to reach faces that are best processed in a stand alone wet blast system.

Using a closed-circuit wet blast circuit Vapormatt phosmatt systems can simultaneously phosphate, etch, de-grease, de-rust and de-scale the surface.

The Phosmatt Process uses a heated phosphate solution as the carrier for the abrasive media. This combination causes the chemical action to start immediately between metal substrate and the phosphate solution as a result small, fast growing crystals appear on the nascent surface.

The Vaporblack process, developed jointly by Vapormatt and Blackfast Chemicals, enables parts to be processed at room temperature (18°C to 24°C) employing a special chemical that is far more environmentally friendly than conventional solutions and non-hazardous to operators.

Typical process time is less than five minutes, compared with the 45 minutes needed for traditional blacking.

Unlike other equipment the Decomatt System contains all pressured abrasive delivery lines within the cabinet to completely eliminate the danger of leakage as a result of system failure.

In addition, the design minimizes space required which is at a premium in nuclear plants. This design maximizes the equipment which can be placed within your decontamination shop.

As an environmentally friendly alternative to chemical cleaning the Vapormatt Profelis in line system will wet blast, rinse and dry continuous wire, cable and strip products to a high standard.

Having been designed to fit into existing process lines the Profelis has a very compact footprint and is ruggedly constructed from non corrosive materials compatible with the wet blast process to ensure a long working life.

The first of Vapormatt' s large cats, the Panther, is a medium sized manual wet blasting cabinet with a side door for loading.

With small manufacturing workshops in mind the Panther has been designed to save space whilst still delivering high standards of wet blasting.

The ergonomic design of the MK3 gun makes for comfortable processing whilst the Vapormatt pump delivers effective results on a as little as 10cfm of air.