| |
|
Blast Machine Spare Parts
& Accessories |
| |
|
|
| |
|
Welcome to the Vapormatt Spare
Parts section - the only source you need for ALL your blasting
requirements. If you cannot find what you want please contact us, we
can probably supply the part anyway! This section is continually
being updated / added to, so please check back here often and contact us
with your enquiries.
|
| |
|
|
| |
|
Please note that the photographs displayed
below are to help identify products but may not be of the exact component
described, but a similar one. E. & O.E.
|
| |
|
|
| |
|
Contents: |
| |
|
|
| |
|
|
| |
|
|
| |
|
PUMPS |
| |
|
|
| |
|
Vapormatt Mk.5 Pump |
| |
|
|
| |
|
|
|
|
|
| ITEM |
DESCRIPTION |
PART
NO. |
| 1 |
Pump
frame, stainless steel
Pump
frame, aluminium |
N000ZP01
1316 |
|
2
|
Adaptor,
brass
Adaptor,
stainless steel
|
B4-003-004
B4-003-003
|
|
3
|
Coupling,
brass
Coupling,
stainless steel
|
B4-003-001
B4-003-002
|
|
4
|
M8 nut
|
B6-004-001
|
|
5
|
M8
washer
|
B6-004-002
|
|
6
|
Casing
bolt
|
N000ZP02
|
|
7
|
Strainer
|
N000ZP09
|
|
8
|
Motor
& shaft; 4kw, 380/440v, 50/60Hz
|
A10-044
|
|
9
|
Bearing
thrower, 4kw
Bearing
thrower, 5.5kw
|
1302/06
N000ZP92
|
|
10
|
Wear
sleeve
|
1302/04
|
|
11
|
Gland
thrower
|
1310/02
|
|
12
|
Body,
50mm bore outlet
Body,
35mm bore outlet
|
1355/01
1302/01
|
|
13
|
Impeller,
50mm
Impeller,
50mm (high pressure)
Impeller,
35mm
|
1356/01
N000ZP05
1302/10
|
|
14
|
Inlet
(35mm & 50mm)
|
1302/02
|
|
15
|
Bottom
plate, stainless steel
|
N000ZP04
|
|
|
|
| |
|
|
| |
|
|
| |
|
Vapormatt Mk.6 Pump |
| |
|
|
| |
|
|
|
|
|
| ITEM |
DESCRIPTION |
PART
NO. |
| 1 |
Motor
& shaft; 4kw, 380/440v, 50/60Hz
Motor
& shaft; 5.5kw, 380v/480v, 50/60Hz
|
A10-044
A10-048 |
|
2
|
M12
Nylock nuts
|
B6-007-004
|
|
3
|
M12
flat washers
|
B6-007-002
|
|
4
|
Spacer
ring, 50mm pump, 4kw motor
Spacer
ring, 50mm pump, 5.5kw motor
|
N000ZP08
N000ZP12
|
|
5
|
Frame
(stainless steel)
Frame
(aluminium)
|
N000ZP01
1316
|
|
6
|
M12
x 75mm screws
|
B6-007-026
|
|
7
|
Vee
clamp
|
B4-003-041
|
|
8
|
Casing
bolt
|
N000ZP02
|
|
9
|
M8
flat washers
|
B6-004-002
|
|
10
|
M8
nuts
|
B6-004-001
|
|
11
|
Strainer
|
N000ZP09
|
|
12
|
Bearing
thrower, 4kw
Bearing
thrower, 5.5kw
|
1302/06
N000ZP92
|
|
13
|
Wear
sleeve
|
1302/04
|
|
14
|
Gland
thrower
|
1310/02
|
|
15
|
Body,
50mm bore outlet (VSPS)
Body,
35mm bore outlet (VSPS)
|
N000ZP17
N000ZP26
|
|
16
|
Impeller,
50mm
Impeller,
50mm (high pressure)
Impeller,
35mm
|
1356/01
N000ZP05
1302/10
|
|
17
|
Inlet
(35mm & 50mm)
|
N000ZP22
|
|
18
|
Bottom
plate, stainless steel
|
N000ZP04
|
|
19
|
Screw
clip
|
B4-001-035
|
|
|
|
| |
|
|
| |
|
|
| |
|
GLOVES |
| |
|
|
| |
|
Elbow Length Gloves |
| |
|
|
| |
|
|
|
|
|
| ITEM |
DESCRIPTION |
PART
NO. |
| |
General
purpose gloves made from natural rubber.
Thickness is 30uM, hand size 11, suited for hand
protection in open sand blast systems.
|
|
|
1
|
Natural
rubber
17"
long x 6" port, standard duty, crumb finish
on hand
|
B5-001-020
|
|
|
|
| |
|
|
| |
|
|
| |
|
Shoulder Length Gloves (gauntlets or glove box gloves) |
| |
|
|
| |
|
|
|
|
|
| ITEM |
DESCRIPTION |
PART
NO. |
| |
Specifically
designed for use on cabinets and other glove
boxes, these gloves are hand size 11 and are
available in several weights and materials.
|
|
| |
Natural
Rubber Gloves :
|
|
|
|
24"
long x 6" port, heavy duty, crumb finish
hand, pair.
24"
long x 6" port, heavy duty, crumb finish
hand, right.
24"
long x 6" port, heavy duty, crumb finish
hand, left.
|
B5-001-001
B5-001-001R
B5-001-001L
|
|
|
24"
long x 6" port, standard duty, smooth hand,
pair.
24"
long x 6" port, standard duty, smooth hand,
right.
24"
long x 6" port, standard duty, smooth hand,
left.
|
B5-001-012
B5-001-012R
B5-001-012L
|
|
|
26"
long x 8" port, light duty, pair.
|
B5-001-006
|
|
|
26"
long x 8" port, heavy duty, crumb finish
hand, pair.
26"
long x 8" port, heavy duty, crumb finish
hand, right.
26"
long x 8" port, heavy duty, crumb finish
hand, left.
|
B5-001-014
B5-001-014R
B5-001-014L
|
|
|
26"
long x 8" port, standard duty, smooth hand,
pair.
26"
long x 8" port, standard duty, smooth hand,
right.
26"
long x 8" port, standard duty, smooth hand,
left.
|
B5-001-015
B5-001-015R
B5-001-015L
|
|
|
Neoprene
gloves :
32"
long x 8" port, medium duty, pair.
|
B5-001-022
|
|
|
Nitrile
gloves :
32"
long x 8" port, medium duty, ambidextrous
single.
|
B5-001-023
|
|
|
|
| |
|
|
| |
|
|
| |
|
Glove Liners |
| |
|
|
| |
|
|
|
|
|
|
ITEM
|
DESCRIPTION |
PART
NO.
|
|
|
Glove
liners are thin, separate gloves used to promote
hygiene for when several operators will use the
same glove box. The heat resistant liners
are particularly useful when using degreasing
equipment with high water temperatures.
|
|
|
|
Cotton
glove liners.
|
B5-001-002 |
|
|
Heat
resistant glove liners.
|
B5-001-005
|
|
|
|
| |
|
|
| |
|
|
| |
|
HOSES |
| |
|
|
| |
|
Abrasive Slurry Hose |
| |
|
|
| |
|
|
|
|
|
|
ITEM
|
DESCRIPTION |
PART
NO.
|
|
1
|
Silicone
rubber hose, wire reinforced. This hose has
similar usage to the natural rubber lined
hose. However, it is more flexible, its'
reinforcement gives it a tighter bend radius and
the cuffed ends keep flow velocity even throughout
a system, available by length shown.
22mm
(1/2") bore x 1m
33mm
(1.25") bore x 1m
48mm
(2") bore x 1m
48mm
(2") bore x 1.8m
60mm
(2.5") bore x 1.5m
60mm
(2.5") bore x 1m
|
B4-002-070
B4-002-065
B4-002-062
B4-002-061
B4-002-063
B4-002-064 |
|
|
Polyurethane
hose, wire reinforced. This hose is ideally
suited to the transport of abrasive slurry or dry
abrasives. It's cost is offset by it's life
expectancy, available by the metre.
50mm
(2") bore, per metre
|
B4-002-045
|
|
2
|
Clear
PVC hose, wire reinforced. This hose is
suitable for medium duty slurry transport, light
duty dry abrasive transport, water or air.
Available by the metre.
12mm
(1/2") bore, per metre.
19mm
(3/4") bore, per metre.
25mm
(1") bore, per metre.
32mm
(1.25") bore, per metre.
38mm
(1.5") bore, per metre.
50mm
(2") bore, per metre.
|
B4-002-042
B4-002-036
B4-002-037
B4-002-038
B4-002-039
B4-002-040
|
|
3
|
Natural
rubber lined hose. This hose is well suited
to abrasive slurry, max temperature 100 deg.C,
available by the metre.
19mm
(3/4") bore, per metre.
25mm
(1") bore, per metre.
32mm
(1.25") bore, per metre.
38mm
(1.5") bore, per metre.
50mm
(2") bore, per metre.
62mm
(2.5") bore, per metre.
|
B4-002-001
B4-002-002
B4-002-011
B4-002-019
B4-002-012
B4-002-014
|
|
|
|
|
|
|
|
| |
|
|
| |
|
Air and Water Hose |
| |
|
|
| |
|
|
|
|
|
| ITEM |
DESCRIPTION |
PART
NO. |
| 1 |
Rubber
air & water hose, available by the metre.
6mm
(1/4") bore, per metre.
10mm
(3/8") bore, per metre.
12.5mm
(1/2") bore, per metre.
19mm
(3/4") bore, per metre.
25mm
(1") bore, per metre.
32mm
(1.25") bore, per metre.
38mm
(1.5") bore, per metre.
45mm
(1.75") bore, per metre.
50mm
(2") bore, per metre.
|
B4-002-010
B4-002-026
B4-002-004
B4-002-009
B4-002-015
B4-002-020
B4-002-058
B4-002-028
B4-002-071 |
|
|
|
| |
|
|
| |
|
|
| |
|
Shot Blast Hose |
| |
|
|
| |
|
|
|
|
|
|
ITEM
|
DESCRIPTION |
PART
NO.
|
|
|
Shot
blast hose is very thick walled to allow for
considerable wear, it is designed to be connected
to external couplings.
19mm
(3/4") bore, per metre.
25mm
(1") bore, per metre.
32mm
(1.25") bore, per metre.
| | | |
