Vapormatt Cougar 15
  Vapormatt Cougar 15 machine
 
  TECHNICAL SPECIFICATION
 
 

Machine :

 

Construction

6mm GRP composite cabinet, with abrasion resistant lining and external box section steel main support frame.  External colour generally RAL 7032 (light grey).

 

Internal Dimensions

Generally; depth 1330mm, width 1500mm, height 1330mm over lower grids (height 1175mm over turntable).

 

Door

Swing door with replaceable combined rubber lining / drain channel and electrical safety interlock - hinges mounted on steel framework.  Door opening; width 1150mm, height 1330mm.

 

Work Suface

Perforated low level heavy duty gridding, UDL 100kg. (option UDL 700kg).

 

Window

1160mm x 310mm safety glass with auto wash / wipe.

 

Glove Ports

4 off, fitted with cushions and arm length gloves (replaceable from outside).

 

Rinsing

Internal, mains fed, trigger operated rinse gun.

 

Pump

35mm high efficiency, high volume, vortex pump - solid urethane, glandless construction.

 

Pump Motor

4kw 3 phase, 2 pole IP44 DOL starting with overload protection.

 

Blast Gun

Lightweight urethane body, recessed air jet, and boron carbide nozzle.

 

Sump Capacity

Water ~ 100 ltr, media ~ 15 ltr (30kg).  Sump fitted with drain plug for emptying.

 

Controls

Single integrated on / off control, simultaneously operates pump, compressed air, window wiper, and screen wash.

Electro pneumatic foot switch for rugged, safe and hassle-free operation. 

 

Electrical Equipment

To IEE, VDE, or EN 60204-1 standards - according to market. 

Fluorescent light unit.  Window wiper.  Door interlock.  Hours-run meter.  24v control circuits.  Solenoid valves for air and water supplies.  Main enclosure (IP55) with hinged lid and isolator.


SERVICES REQUIRED:

 

Electrical Supply

20A (at 415v) 3 phase & neutral, voltage and frequency to suit market.

 

Air Supply

7 bar (100 psi), 1.14m³/min (40 cfm) per gun.  Single gun machine 12.5mm (1/2" bsp / npt) connection.

 

Water Supply

2-6 bar (30-100 psi), 12.5mm (1/2" bsp / npt) connection.

 

Drain

Floor level with grit trap 40 litres / min - 8 gallons per minute intermittent.

 

Vent

200mm / 8" duct to external atmosphere.

 

Optional Equipment :

 

Rubber sheet lining. (additional to polyurethane lining).

 

Raised level mild steel worktable with bonded polyurethane covering, (UDL 400kg).  Dimensions 1000mm. x 1000 mm.

 

Mild steel turntable with bonded polyurethane covering, mounted on stand, (UDL 600kg). Turntable diameter 1100 mm.

 

Trolley unit, plus exterior load end with sump and rails.

 

Aircraft wheel cleaning jig - suitable for mounting on turntable (turntable extra).

 

Portable hydrocyclone on stand.

 

Built-in hydrocyclone with snap coupling selection / changeover system.

 

Hand operated moving bed paper filter - mini unit, (excluding sensor, warning light, and water shut-off valve). (Paper width 340mm.)

 

Clear tank type "S".

 

Hand operated moving bed paper filter - standard size unit, (including sensor, warning light, and water shut-off valve). (Paper width 450mm.)

 

Automatic moving bed paper filter - standard size unit.  (Paper width 450mm).

 

Standard duty air powered diaphragm pump for rinse water return from filter system, including; rinse gun fitted inside blast cabinet.

 

Cartridge filter to complete recirculated water option to a fully closed loop system. No drain connection required for machine with this system.

 

Auto chemical dosing system.

 

Motorised barrel unit mounted through side* or door* of machine. Barrel dimensions; 250mm. diameter, depth 280mm.  Construction; solid polyurethane. Uses existing manual blast gun mounted in a holster.  Barrel and drive shafts are detachable for storage outside of machine when not in use.

 

4.5kw. stainless steel cabinet sump immersion heater with thermostat.

 

Automatic sump overflow bubble valve, timer and auto control valve.

 

Component blow-off nozzle and hose complete with filter regulator.

 

Air pressure gauge, regulator, and hours-run meter mounted at the front of the machine

 

360mm diameter urethane hand operated barrel.

 

2" cabinet sump drain valve and fittings.

 

Sump water decant valve.

 

Concentrator / Irrigation system for use with plastic media. Including special pump impeller and high acceleration nozzle.

 

Abrasive level sight glass.

 

Additional blast gun with snap coupling changeover system.

 

Special machine colour.

 

Vapormatt Ltd reserves the right to change without notice any of the specifications included on this web site.  The content is for illustration only and does not constitute an offer for sale, it should be noted that machines illustrated may include optional items not included in the basic specification.


 

I Home Page I Vapormatt Group I Vapormatt Products I Wet Blast and High Pressure Water Applications I Spares and Abrasives I
I Used Machines I Downloads I Vapormatt News and Events I Site Search I Contact Vapormatt I Privacy I Site Map I

© Vapormatt Group Ltd .2000 - 2008. All rights reserved. Site Maintained by Bazil