Vapormatt Group - Vapormaster 1217 Wet Blast Machine

Vapormaster 1217

TECHNICAL SPECIFICATION

Machine :

Construction

Rigid steel chassis (100mm x 100mm), with GRP composite panels and internal replaceable rubber curtains. External colour generally RAL 7032 (light grey).

Internal Dimensions

Generally 1150mm x 1600mm x 1300mm height above worktable.

Door

Swing door with replaceable combined rubber lining / drain channel and solid state electrical safety interlock - hinges mounted on steel chassis.

Work Suface

Fixed, perforated grid with bonded polyurethane coating. 300kg UDL.

Window

1160mm x 310mm double glazed and with auto wash / wipe.

Glove Ports

4 off, fitted with cushions and arm length gloves (replaceable from outside).

Rinsing

Internal, mains fed, trigger operated rinse gun.

Pump

35mm high efficiency, high volume, vortex pump - solid urethane, glandless construction.

Pump Motor

4kw 3 phase, 2 pole IP44 DOL starting with overload protection.

Blast Gun

Lightweight urethane body, recessed air jet, and boron carbide nozzle.

Sump Capacity

Water ~ 100 ltr, media ~ 30kg. Sump fitted with drain valve.

Controls

Single integrated on / off control, simultaneously operates pump, compressed air, window wiper, and screen wash. Adjustable air pressure regulator and gauge.

Electrical Equipment

To IEE, VDE, or EN 60204-1 standards - according to market.

Fluorescent light unit. 24v window wiper. Door interlock. Hours-run meter. 24v DC control circuits. Solenoid valves for air and water supplies. Main enclosure (IP55) with hinged lid and isolator.

SERVICES REQUIRED :

Electrical Supply

380V OR 415V, 50hZ, 20 AMP, 3 phase & neutral.

Air Supply

7 bar (100 psi), 1.14m³/min (40 cfm) per gun. Single gun machine 12.5mm (1/2" bsp) connection.

Water Supply

2-6 bar (30-90 psi), 12.5mm (1/2" bsp) connection.

Drain

Floor level with grit trap 40 litres / minute intermittent.

Vent

200mm / 8" duct to external atmosphere.

Optional Equipment :

Rubber sheet lining. (additional to polyurethane lining).

Raised level mild steel worktable with bonded polyurethane covering, (UDL 400kg). Dimensions 1300mm. x 600mm.

Mild steel turntable with bonded polyurethane covering, mounted on stand, (UDL 750kg). Turntable diameter 850 mm.

Mild steel turntable with bonded polyurethane covering, mounted on trolley unit (UDL 750kg), plus exterior load end with sump and rails. Turntable diameter 850 mm.

Auto sliding door on right hand side.
The overall height of machine with sliding door fitted will be 3950mm. (nominal).

Second auto sliding door on left hand side.
The overall height of machine with sliding door fitted will be 3950mm. (nominal).

Swing door on left.

Swing door with 500 mm. extension blister.

Side extension blister of 600 mm.

Vent fan and mist eliminator.

Portable hydrocyclone on stand.

Built-in hydrocyclone with snap coupling selection / changeover system.

Built-in hydrocyclone with abrasive valve and auto controls (switch selection).

Clear tank type "S".

Hand operated moving bed paper filter - standard size unit, (including sensor, warning light, and water shut-off valve). (Paper width 450mm.).

Automatic moving bed paper filter - standard size unit. (Paper width 450mm.)

High level automatic moving bed filter - standard size unit, including; extra large reservoir tank, shut-off valve, dedicated cyclone unit and control system, and clear tank type "S" for emergency overflow protection. (Paper width 450mm.)

Oil skimmer, fitted to reservoir tank of moving bed filter.

Standard duty air powered diaphragm pump for rinse water return from filter system, including; rinse gun fitted inside blast cabinet.

Heavy duty air powered diaphragm pump for rinse water return from filter system, including; rinse gun fitted inside blast cabinet.

Cartridge filter to complete recirculated water option to a fully closed loop system. No drain connection required for machine with this system.

Auto chemical dosing system.

Automatic abrasive dosing system.

710mm. mild steel barrel with replaceable urethane lining, mounted in a swing door blister. Four blast guns and water wash guns are mounted on a fixed gantry. Air and water valves together with component chute and catchment tray are provided.

Motorised barrel unit mounted through side or door of machine. Barrel dimensions; 250mm. diameter, depth 280mm. Construction; solid polyurethane. Uses existing manual blast gun mounted in a holster. Barrel and drive shafts are detachable for storage outside of machine when not in use.

Air blow-off system for barrel.

4.5kw. stainless steel cabinet sump immersion heater with thermostat.

Radial arm progressive movement oscillation unit, with motorised gun height adjustment, complete with powered variable speed turntable drive unit, 4 process guns, auto abrasive / air control valves and auto wash system.

Vertical oscillation unit, complete with ;
•	Variable speed AC motor with analogue speed setting.
•	Variable minimum / maximum travel limit stops with digital input limit distance.
•	Variable speed turntable drive unit.
•	4 Process guns, auto abrasive / air control valves and auto wash system.

Variable speed turntable drive unit.

Sump overflow still water baffle.

Component blow-off nozzle and hose complete with filter regulator.

Air pressure gauge, regulator, and hours-run meter mounted at the front of the machine.

360mm diameter urethane hand operated barrel.

Sump water decant valve.

Concentrator / Irrigation system for use with plastic media. Including special pump impeller and high acceleration nozzle.

Abrasive level sight glass.

Additional blast gun with snap coupling changeover system.

Additional blast gun with automatic valve changeover system (switch selection).

Special machine colour.

Loading derrick with electric winch 150kg.

Vapormatt Ltd reserves the right to change without notice any of the specifications included on this web site. The content is for illustration only and does not constitute an offer for sale, it should be noted that machines illustrated may include optional items not included in the basic specification.


	Home