Vapormatt Lynx 10
  Vapormatt Lynx 10 machine
 
  TECHNICAL SPECIFICATION
 
 
Machine :
 
Construction
6mm GRP composite cabinet, with abrasion resistant lining and external box section steel main support frame.  External colour generally RAL 7032 (light grey).
 
Internal Dimensions
Generally 950mm x 950mm x 1350mm above worktable.
 
Door
Swing door with replaceable combined rubber lining / drain channel and electrical safety interlock.
 
Work Suface
Perforated heavy duty gridding, UDL 500kg.
 
Window
660mm x 330mm safety glass with auto wash / wipe.
 
Glove Ports
2 off, fitted with cushions and arm length gloves (replaceable from outside).
 
Rinsing
Internal, mains fed, trigger operated rinse gun.
 
Pump
35mm high efficiency, high volume, vortex pump - solid urethane, glandless construction.
 
Pump Motor
4kw 3 phase, 2 pole IP44 DOL starting with overload protection.
 
Blast Gun
Lightweight urethane body, recessed air jet, and boron carbide nozzle.
 
Sump Capacity
Water ~ 100 ltr, media ~ 30kg.  Sump fitted with drain plug for emptying.
 
Controls
Single integrated on / off control, simultaneously operates pump, compressed air, window wiper, and screen wash.
 
Electrical Equipment
To IEE, VDE, or EN 60204-1 standards - according to market. 
Fluorescent light unit.  Window wiper.  Door interlock.  Hours-run meter.  24v control circuits.  Solenoid valves for air and water supplies.  Main enclosure (IP55) with hinged lid and isolator.

SERVICES REQUIRED :
 
Electrical Supply
20A (at 415v) 3 phase & neutral, voltage and frequency to suit market.
 
Air Supply
7 bar (100 psi), 1.14m³/min (40 cfm) per gun.  Single gun machine 12.5mm (1/2" bsp / npt) connection.
 
Water Supply
2-6 bar (30-90 psi), 12.5mm (1/2" bsp / npt) connection.
 
Drain
Floor level with grit trap 40 litres / min - 8 gallons per minute intermittent.
 
Vent
200mm / 8" duct to external atmosphere.
 
Optional Equipment :
 
Rubber sheet lining. (additional to polyurethane lining).
 
Mild steel turntable with bonded urethane covering (UDL 50kg.)
 
Portable hydrocyclone on stand.
 
Built-in hydrocyclone with snap coupling selection / changeover System.
 
Hand operated moving bed paper filter - mini unit, (excluding sensor, warning light, and water shut-off valve).  (Paper width 340mm.)
 
Clear tank type "S".
 
Hand operated moving bed paper filter - standard size unit, (including sensor, warning light, and water shut-off valve). (Paper width 450mm.)
 
Automatic moving bed paper filter - standard size unit.  (Paper width 450mm.)
 
Standard duty air powered diaphragm pump for rinse water return from filter system, including; rinse gun fitted inside blast cabinet.
 
Cartridge filter to complete recirculated water option to a fully closed loop system. No drain connection required for machine with this system.
 
Auto chemical dosing system.
 
Motorised barrel unit mounted through side or door of machine.  Barrel dimensions; 250mm. diameter, depth 280mm. Construction; solid polyurethane. Uses existing manual blast gun mounted in a holster.  Barrel and drive shafts are detachable for storage outside of machine when not in use
 
4.5kw. stainless steel cabinet sump immersion heater with thermostat.
 
Automatic sump overflow bubble valve, timer and auto control valve.
 
Component blow-off nozzle and hose complete with filter regulator.
 
Air pressure gauge, regulator, and hours-run meter mounted at the front of the machine.
 
360mm diameter urethane hand operated barrel.
 
2" Cabinet sump drain valve and fittings.
 
Sump water decant valve.
 
Concentrator / Irrigation system for use with plastic media. Including special pump impeller and high acceleration nozzle.
 
Abrasive level sight glass.
 
Additional blast gun with snap coupling changeover system.
 
Special machine colour.

 

Vapormatt Ltd reserves the right to change without notice any of the specifications included on this web site.  The content is for illustration only and does not constitute an offer for sale, it should be noted that machines illustrated may include optional items not included in the basic specification.


 

I Home Page I Vapormatt Group I Vapormatt Products I Wet Blast and High Pressure Water Applications I Spares and Abrasives I
I Used Machines I Downloads I Vapormatt News and Events I Site Search I Contact Vapormatt I Privacy I Site Map I

© Vapormatt Group Ltd. 2000 - 2009. All rights reserved. Site Maintained by Bazil