Safespray 10
  Safespray 10 machine
 
  The Safespray 10 is an enclosed, manually operated, parts degreasing machine intended to replace open "paraffin wash" units.  Mist and vapour from the solvent in use are contained within the Safespray 10 cabinet and are exhausted before the enclosure can be opened, thus removing the need for the operator to wear breathing or splash protection.
   
  When operated with "V Clean RTU" the Safespray 10 may be used for degreasing metals, plastic and painted surfaces, including chlorinated rubber finishes. The spray gun will quickly remove oil and grease, the integral brush can be used to dislodge thicker or more tenacious deposits. The V Clean RTU degreaser is taken from the solvent drum by a diaphragm pump fed through a replaceable cartridge filter to a hand-held trigger operated spray gun. It then drains back into the reservoir tank via a 3-stage sedimentation filter.
   
  A compressed air trigger-operated nozzle is provided to blow-off surplus solvent from the treated parts and is mounted on the left of the machine.
   
  Before the door can be opened an evacuation cycle occurs to reduce the airborne solvent levels to below the OEL (occupational exposure limit).
   
  The Safespray 10 may be operated with other solvents when different types of contamination are to be removed. In this case Vapormatt must be consulted beforehand.
   
 
 
  TECHNICAL SPECIFICATION
 
 
Machine:
 
Special diaphragm pump plus cartridge filter unit with sedimentation filter system.
 
External solvent reservoir.
 
Trigger operated rinse gun with brush.
 
Anti-static hose and fittings
 
Pneumatic door interlock. 
 
Exhaust vent extraction system complete with mist eliminator.
 
Anti-static cabinet lining.
 
2 off glove ports fitted with cushions and arm length gauntlets (replaceable from outside).
 
Swing door on right.
 
Cabinet light - externally mounted.
 
Stainless steel turntable.  Turntable Diameter 500mm.
 
Component blow-off nozzle and hose complete with filter and air pressure regulator.
 

Machine Colour: 

Panels - Light Grey RAL 7032.
Framework - Light Grey RAL 7005

 
Operator Safety:
 
The Safespray 10 is designed to operate with "V Clean RTU" degreasers. Do not use other solvents as they may be incompatible with the materials of construction and dangerous to health.

SERVICES REQUIRED
 
Electrical Supply

220 / 240 volts, 50 / 60 Hz, 3 amp, 1 phase AC.  

To be protected by residual current device (RCD or Earth Trip).

 
Air Supply

Connection ½" b.s.p.

Maximum pressure 7 Bar (100 p.s.i.).

Minimum pressure 2 Bar (30 p.s.i.).

Flow 0.28 - 0.57 m³/min. (20-40 fcm).

 
Vent

8" diameter to external atmosphere.

This is essential for safety.

 

 
 

Vapormatt Ltd reserves the right to change without notice any of the specifications included on this web site.  The content is for illustration only and does not constitute an offer for sale, it should be noted that machines illustrated may include optional items not included in the basic specification.


 

I Home Page I Vapormatt Group I Vapormatt Products I Wet Blast and High Pressure Water Applications I Spares and Abrasives I
I Used Machines I Downloads I Vapormatt News and Events I Site Search I Contact Vapormatt I Privacy I Site Map I

© Vapormatt Group Ltd. 2000 - 2009. All rights reserved. Site Maintained by Bazil